HVOF Coating Services in Dubai, UAE

Ultraweld Coat provides HVOF Coating Services in Dubai, UAE for valve, pump and process components that face wear and corrosion together. Components are coated and finished at our works in Pune, India and supplied to customers across the Emirates.

Where HVOF coating is used in the UAE

The UAE’s industry puts hard demands on metal surfaces. Offshore and sour gas production erodes valve balls, seats and gates with sand and attacks them with hydrogen sulfide. Desalination and power plants run pumps on hot brine. Aluminium smelting and rolling needs rolls and dies that molten metal will not stick to. A dense tungsten carbide or chromium carbide layer applied by HVOF addresses each of these: it is harder than the abrasive, and dense enough to keep salt water away from the base metal.

Ultraweld Coat provides advanced HVOF (High Velocity Oxygen Fuel) coating services in Dubai, UAE, delivering high-performance wear and corrosion protection for industrial components. Our HVOF thermal spray coatings are designed to enhance the durability, hardness, and performance of components operating in demanding environments such as oil & gas, petrochemical, marine, power generation, and manufacturing industries.

Using advanced HVOF technology, we apply dense and highly bonded coatings that significantly improve resistance to abrasion, erosion, corrosion, oxidation, and high temperatures. Our coating solutions help extend equipment life, reduce maintenance costs, minimize downtime, and improve operational efficiency for industries across Dubai and the UAE.

HVOF Coatings Components

Applications :

Frequently asked questions

Which HVOF coating suits offshore valves in the UAE?

Tungsten carbide with a corrosion-resistant binder is the usual choice for valve balls, seats and gates in sandy, sour or seawater service. The ball and seats are then lapped together so the metal-to-metal seal stays tight.

Can components be sent from Dubai for coating?

Yes. Send the drawing, base material and service conditions for a quotation. Parts are coated, ground and inspected in Pune and returned ready to fit. Worn parts can often be re-coated instead of replaced.